Why cant i download ghost gunner files

CNC types: does CNC lessen the chances of drills walking, by controlling the feed better than with a hand fed quill? Or worse, because you lose the feel? Most socket and wrench sets skip 16mm. I have no idea why… but many Ford and Mazda vehicles use 16mm for their driveshaft bolts…. It is generally the head of a bolt with a 10 mm coarse thread. New tools have a learning curve and some mistakes ,tis all part of the fun learning process.

I look forward to the next installment of said project. Oh,and watch out for saboteur books,they are a crafty bunch! We were taught to always drill holes first.

As stated above, drills can wander in a void. This can be somewhat controlled in a large CNC machine with the feed and spindle speed controls but there is no reason to push your luck. Excellent write up BTW. If you need loose tools like a 17mm socket , pawn shops are a great place to scavenge for them. He failed, but many have succeeded, and anyone with a manual milling machine or CNC and even a modicum of knowledge about how to use it will succeed quite easily.

The work needed to finish an AR lower receiver is, after all, pretty simple for the average machinist. The state of things today is that it is quite straightforward to produce an unlicensed, untraceable, and working AR that is completely legal. Obviously, this worries gun control advocates. But it certainly is a lot harder to prevent it, even if the laws are in place. Information in the form of g-code, CAD files, and the like. Lay people may dream of requiring CNC machines and 3D Printers to have governors of some sort that prevent them from producing these things, but that would be difficult to impossible to implement, and vulnerable to being constantly defeated.

Once a thing becomes information, it is so easy to transmit it everywhere and change it slightly to make detection difficult, that regulating the information is close to impossible. Ghost Gunner is embroiled in a law suit with the State Department over export controls governing the export of weapons.

The State Department has argued that publishing the g-code or CAD Drawings for an AR violates these regulations and Defense Distributed has countersued based on their interpretation of their rights.

The case has gone on to appeal and is due to be heard in March. Once a thing goes to being information, it becomes incredibly hard to regulate and control. Put aside the controversial issue of guns. If there is one thing the music industry learned, it is that once music became information i. And what about the Ghost Gunner? Get our latest blog posts delivered straight to your email inbox once a week for free. Why is there any concern at all in the USA about the ease of home manufacture of firearms when firearms are so easily obtained and owned legally?

In my state, semi-automatic rifles have just been banned altogether. In some areas more than others. How fast can the machine run? For example, many machines that claim to cut aluminum do so by cutting as fast as possible at depths of just 0.

The result is the end mill tip dulls quickly and then part quality suffers. Do I need a special power supply? No external power brick is used; the machine is entirely self contained. How do I connect to Ghost Gunner? What sort of maintenance is required for Ghost Gunner? All bearings are sealed and contain wipers to prevent foreign contaminate entry. The rails are stainless steel and are factory lubricated, but do require periodic wiping to prolong life.

End Mills dull over time and are considered a consumable. With proper use, end mills should manufacture approximately 8 to 10 AR pattern lowers before needing to be replaced. Emptying the chip tray by use of a shop vac or similar after each build will prevent chip overflow shaved aluminum chips occupy approximately 15 times their solid volume.

We also offer technical support at [email protected]. Is manufacturing a firearm legal? In general, yes. Semi-automatic firearms, including the AR lower receivers, are generally legal to manufacture for private individuals under federal law. GG makes no claim regarding your local manufacturing legalities. Under federal law, manufacturing firearms for purpose of sale and distribution without an FFL is prohibited.

Without an FFL, you should manufacture firearms for personal use only. Recent ATF determinations have signaled that allowing others use of your CNC equipment may itself constitute manufacturing, therefore Ghost Gunner advises GG owners to neither print firearms for other individuals, nor allow other individuals to use their Ghost Gunner to manufacture firearms without the advice of counsel.